spinMAG
Spinflex offers a unique compact magnet that can be mounted on an optical table for a variety of ESR and ODMR experiments. This magnet is based on a permeant unit with additional coils for a magnetic field sweeping range of ~1 kG. The system includes the magnet stature, a power supply for sweeping the coils, and an optional magnetic field controller to stabilize the magnetic field.
- Magnetic Field up to 0.5 Tesla
- No need for water or air cooling
- Gap between poles: 55 mm and smaller (adjustable by the user)
- Homogeneity: About 1 G for 5 mm sphere (better homogeneity can be made for a pre-defined gap).
- Temperature stability: -0.004 %/°C for the 0.25 T unit -0.12 %/°C for the 0.45 T unit ~ 20 mG stability when employing closed loop electromagnet add-on on the poles with Hall field controller
Performance (0.5T model)
1D - Homogeneity
2D - Homogeneity
spinMAG Specifications and Applications
spinMAG combines a permanent magnet with sweep coils in a compact dipole designed and manufactured by Spinflex. It mounts directly on an optical table and runs without cooling in standard use, which makes it a practical alternative to a large laboratory electromagnet for ESR, pulse EPR and ODMR experiments.
Specifications (0.5 T model)
| Maximum field | Up to 0.5 T |
|---|---|
| Field sweep range | ~1 kG |
| Homogeneity | ~1 G over a 5 mm sphere (better homogeneity available for a pre-defined gap) |
| Field stability | ~20 mG with the optional closed-loop add-on and Hall field controller |
| Temperature coefficient | –0.004 %/°C (0.25 T unit); –0.12 %/°C (0.45 T unit) |
| Pole diameter | 70 mm |
| Pole gap | 0–55 mm (adjustable) |
| Coil spacing | 0–55 mm |
| Coil efficiency | ~400 G/A at 5 cm gap |
| Coil resistance / inductance | 12 Ω per side / ~1 H |
| Maximum current | 2 A without cooling; 3 A with compressed-air cooling |
| Dimensions | 200 × 550 × 180 mm |
| Weight | ~37 kg |
Typical applications
- Pulse EPR – spinMAG is one of the magnets supported by the spinUP pulse EPR spectrometer.
- ODMR and NV-center experiments – an open, table-mounted geometry that leaves room for optics, as in quantum sensing and quantum education labs.
- Compact ESR setups – wherever a small, well-defined field volume is required without the footprint and cooling of a full-size electromagnet.
Frequently asked questions
Does spinMAG need water cooling?
No. It operates without cooling for standard use; compressed-air cooling raises the maximum coil current from 2 A to 3 A.
Can the gap be adapted to my sample or resonator?
Yes. The pole gap is adjustable from 0 to 55 mm, and homogeneity can be optimized for a pre-defined gap.
Request a quote for spinMAG, or download the specification sheet above.