spinMAG

Spinflex offers a unique compact magnet that can be mounted on an optical table for a variety of ESR and ODMR experiments. This magnet is based on a permeant unit with additional coils for a magnetic field sweeping range of ~1 kG. The system includes the magnet stature, a power supply for sweeping the coils, and an optional magnetic field controller to stabilize the magnetic field.

Performance (0.5T model)

0.5T MAGNET

1D - Homogeneity

ESR MAGNET

2D - Homogeneity

2D - MAGNETIC FIELD

spinMAG Specifications and Applications

spinMAG combines a permanent magnet with sweep coils in a compact dipole designed and manufactured by Spinflex. It mounts directly on an optical table and runs without cooling in standard use, which makes it a practical alternative to a large laboratory electromagnet for ESR, pulse EPR and ODMR experiments.

Specifications (0.5 T model)

Maximum fieldUp to 0.5 T
Field sweep range~1 kG
Homogeneity~1 G over a 5 mm sphere (better homogeneity available for a pre-defined gap)
Field stability~20 mG with the optional closed-loop add-on and Hall field controller
Temperature coefficient–0.004 %/°C (0.25 T unit); –0.12 %/°C (0.45 T unit)
Pole diameter70 mm
Pole gap0–55 mm (adjustable)
Coil spacing0–55 mm
Coil efficiency~400 G/A at 5 cm gap
Coil resistance / inductance12 Ω per side / ~1 H
Maximum current2 A without cooling; 3 A with compressed-air cooling
Dimensions200 × 550 × 180 mm
Weight~37 kg

Typical applications

  • Pulse EPR – spinMAG is one of the magnets supported by the spinUP pulse EPR spectrometer.
  • ODMR and NV-center experiments – an open, table-mounted geometry that leaves room for optics, as in quantum sensing and quantum education labs.
  • Compact ESR setups – wherever a small, well-defined field volume is required without the footprint and cooling of a full-size electromagnet.

Frequently asked questions

Does spinMAG need water cooling?
No. It operates without cooling for standard use; compressed-air cooling raises the maximum coil current from 2 A to 3 A.

Can the gap be adapted to my sample or resonator?
Yes. The pole gap is adjustable from 0 to 55 mm, and homogeneity can be optimized for a pre-defined gap.

Request a quote for spinMAG, or download the specification sheet above.

Contact us

spinflex 1

Contact us