spinEDU -Quantum educational kit based on solid-state spin qubits in diamond for quantum technology
Part of the student’s
coursework
Comprehensive lab
manual
“User-friendly”
Software
spinEDU is a unique educational kit suitable for both undergraduate and graduate students who train in the field of quantum science and technology. This kit was developed by the Technion – Israel Institute of Technology and is part of the student’s coursework. The kit allows students to explore and characterize Qubits at room temperature. The lab experiments expose the students to the “cutting edge” of modern research in quantum technology, such as quantum computing, qubit manipulation, and quantum sensing. The experimental system enables you to setup, control, and read out the quantum data in solid-state spin qubits. It uses a known color center in diamonds called the NV center.
Quantum education kit - Lab setup
This Lab setup is built from three sub-systems.
Microwave (MW) system:
Pulsed MW bridge operating at the 2-4 GHz range with 30 W peak power. The bridge supports arbitrary waveform generating schemes.
Data acquisition system and software:
Sophisticated data acquiring computer and very user-friendly operating software for executing a variety of complex experiments, including scripting to change pulse sequence parameters on the fly.
Optical system:
Included a pulsed laser diode for pumping the spins to the |0> state and reading out the ODMR signal.
spinEDU lab setup include a [1 1 1] diamond with ~1017 NV¯ /cm³. Contact us for the optional use of an optical- or electronic- grade diamond for single NV¯ experiments.
Figure: (a) A schematic representation of the diamond lattice with the N (red) and vacancy (light blue). (b) The principal axes of an NV are defined with z-axis parallel to the N-V axis, and x-axis in a plane that consists of the N, V and one of the nearest carbons.
Lab activities
The kit contains a full and comprehensive manual explaining the theory of the experiments and lays down the details of the workflow. The coursework is currently divided into the following eight labs, although additional types of experiments, such as two-qubit Deutsch–Jozsa algorithm, and quantum sensing of AC magnetic fields, can be added at will. Here is some of the activities of each lab:
- Lab 1 – Introduction
Familiarize the students with the physical system (NVs in diamond), the experimental setup, and the acquisition software.
- Lab 2 - ODMR measurements
Perform MW frequency swept ODMR measurements at various magnetic fields and find the NV’s resonance frequency.
- Lab 3 - ODMR Rabi oscillations
Observing and measuring Rabi oscillations both as a function of MW pulse length, and as a function of MW pulse amplitude.
- Lab 4 - Relaxation times
Measuring the relaxation times (T1, T2, T2*) of the NV centers in the diamond sample used in this setup.
- Lab 5 - Dynamical decoupling
Experiment with various dynamic decoupling sequences, such as Carr-Purcell-Meiboom-Gill, XY8 and measuring the coherence times in these sequences
- Lab 6 - Single qubit operations and quantum state tomography
Perform single qubit operation (rotations in Bloch sphere) and measure the fidelity of gates using quantum state tomography.
- Lab 7 - Hyperfine spectroscopy
Using selective microwave pulses to reveal the hyperfine spectrum of NV centers in a CVD diamond, based on the paper Am. J. Phys. 90, 550–560.
- Lab 8 - Deutsch-Jozsa algorithm
Using the 3 levels of the NV spin system to implement the refined Deutsch-Jozsa in spin ensemble, based on the paper Phys. Rev. Lett. 105, 040504
spinEDU scientific background
The purpose of the lab is to enable undergraduate and graduate students to get first-hand knowledge and experience working with systems of solid-state qubits. The lab also enables students to apply the most advanced methodologies of qubit quantum control and sensing by means of advanced microwave pulse sequences. The experiment system enables you to setup, control, and read out the quantum data in solid-state spin qubits. It uses a known color center in diamonds called the NV center. The NV center (NV¯) is a defect in diamonds made of a substitutional nitrogen atom and an adjacent lattice vacancy site (see figure). The NV¯ has two unpaired electrons that are used as qubits. Owing to its energy level structure, it exhibits spin-dependent photoluminescence, making it suitable for optically detected magnetic resonance (ODMR). NV¯ centers in diamonds are used in contemporary basic and applied research as potential building blocks of a quantum computer as well as quantum sensor.
Inside the spinEDU Quantum Education Kit
spinEDU is a complete optically detected magnetic resonance (ODMR) lab built around NV centers in diamond. It shares its ESRM1 control software with the spinUP pulse EPR spectrometer, so students learn on research-grade tools.
Optical setup
- Pulsed green laser diode (518 nm) for spin initialization and readout.
- 20× microscope objective that focuses the laser onto the diamond and collects the photoluminescence.
- Dichroic mirror and long-/short-pass filters that pass only the NV photoluminescence band (600–800 nm) to a sensitive photodetector.
- 3-axis sample stage for precise positioning of the diamond and an adjustable detector stage.
- Electromagnetic coil that applies a static magnetic field along the [111] axis of the diamond.
Microwave setup
- Arbitrary microwave pulses produced by mixing an AWG signal with a synthesized local oscillator, then filtered and switched inside a microwave bridge developed by Spinflex.
- Solid-state power amplification for efficient spin driving, with manual power control.
- An antenna that generates the oscillating magnetic field driving the NV spin transitions near 2.87 GHz.
Control and acquisition
- AWG with 0.5 ns time resolution for shaped and phase-controlled pulses.
- Pulse/pattern generator that synchronizes laser pulses, microwave pulses and acquisition.
- Digitizer with 1 ns time resolution for the photoluminescence signal.
- Pre-defined ODMR pulse sequences, interlaced scripts and a table generator for long parameter sweeps.
What students learn
The lab manual starts with the physics of the NV center, the principles of electron spin resonance, the NV spin Hamiltonian, spin dynamics and the basic principles of spin qubits, and then guides students through eight hands-on labs – from ODMR and Rabi oscillations to relaxation times, dynamical decoupling, quantum state tomography, hyperfine spectroscopy and the Deutsch–Jozsa algorithm.
Frequently asked questions
Does spinEDU require cryogenics?
No. NV centers in diamond can be initialized, controlled and read out at room temperature.
Is the kit suitable for undergraduate courses?
Yes. The manual builds up the theory step by step, and lab staff can prepare template files so students can focus on the physics.
Can we run our own experiments?
Yes. Beyond the eight labs, the pulse sequences are fully configurable, and additional experiments such as quantum sensing of AC magnetic fields can be added.
Request a quote for spinEDU for your university or training program.
Why NV Centers? spinEDU vs. NMR Quantum Teaching Kits
Several platforms are used to teach quantum computing hands-on. Desktop NMR teaching kits, for example, use nuclear spins in molecules at room temperature. spinEDU uses electron spins of NV centers in diamond – a solid-state qubit platform that is actively used in quantum-technology research today.
| NV centers in diamond (spinEDU) | Typical NMR teaching kit | |
|---|---|---|
| Qubit | Electron spin of a solid-state defect | Nuclear spins in molecules |
| Operating temperature | Room temperature | Room temperature |
| Control | Nanosecond microwave pulses near 2.87 GHz | Radio-frequency pulses |
| Readout | Optical (ODMR, photoluminescence) | Inductive NMR detection |
| Link to current research | Quantum sensing, solid-state qubits, ODMR | NMR quantum computing |
Working with NV centers, students practice the full workflow of a modern solid-state qubit lab – optical initialization and readout, microwave control, coherence and dynamical decoupling, state tomography and a simple quantum algorithm – and gain experience that transfers directly to quantum sensing and spin-qubit research. Read more in Teaching Quantum Technology with NV Centers in Diamond.